Assoc. Prof. Ir. Dr. Md Salim Kamil

Assoc. Prof. Ir. Dr. Md Salim Kamil

Associate Professor

Md Salim bin Kamil, graduated with a BSc (Hons) in Naval Architecture and Ocean Engineering from Glasgow University, Scotland, UK; a Master degree in Naval Architecture from University College London (London University), England, UK and a Doctor of Philosophy (Technical Science – Shipbuilding and Ocean Engineering) from Saint Petersburg State Marine Technical University, Saint Petersburg, Russia. He is a registered Professional Engineer with Practising Certificate by the Board of Engineers, Malaysia (Ir, PEng); a registered Chartered Marine Engineer by the Institute of Marine Engineering, Science and Technology, UK (CMarEng); a registered Chartered Engineer by the Engineering Council, UK (CEng). He is also a Fellow member of the Royal Institution of Naval Architects, UK (FRINA), a Fellow member of the Institute of Marine Engineering, Science and Technology, UK (FIMarEST) and a Corporate member of the Institution of Engineers, Malaysia (MIEM).

Md Salim bin Kamil served as a naval officer and naval architect in the Royal Malaysian Navy (RMN) for more than 27 years. During his service in the RMN, he had been involved in several ship construction projects of RMN’s ships and fishing vessels (at MSE/MMHE, Pasir Gudang, Johore; Blohm+Voss Shipyard, Hamburg, Germany and at UniKL MIMET’s Shipyard, Lumut, Perak), ship operation as a marine engineer onboard RMN ships, ship repair and maintenance, contract implementation and management of ship construction projects and equipment procurement. He has experiences in the conduct of ship model experiments for design and construction of RMN’s ships at British Maritime Technology (BMT), London, UK; Hamburg Ship Model Basin (HSVA), Hamburg, Germany; Potsdam Ship Model Basin (SVA), Potsdam, Germany; Danish Maritime Institute (DMI), Copenhagen, Denmark and Marine Technology Center (MTC), Universiti Teknologi Malaysia. Md Salim bin Kamil opted for early retirement from the RMN in June 2004 with the last rank of Commander RMN.

In July 2004, he then joined Universiti Kuala Lumpur Malaysian Institute of Marine Engineering Technology (UniKL MIMET) as a senior lecturer and was promoted to Associated Professor one year later. He has been with the university for over 14 years and he has served as the Head of Campus and the first Dean of UniKL MIMET. RECORD OF EMPLOYMENT: 1.1 June 1977 to April 1980 : Diploma in Mechanical Engineering course, Universiti Teknologi Malaysia 1.2 May 1980 to September 1981 : Trainee marine engineering officer 1.3 October 1981 to July 1984 : Bachelor of Science (BSc) Course in Naval Architecture and Ocean Engineering, Glasgow University, Scotland U.K . 1.4 August 1984 to December 1986 : Project Officer (Naval Architecture),Of fshore Patrol Vessel construction at Malaysia Shipyard and Engineering, Pasir Gudang Johore 1.5 January 1987 to December 1987 : Deputy Marine Engineering Officer onboard RMN’s Offshore Patrol Vessel KD MARIKH 1.6 January 1988 to October 1990 : Staff Officer (Marine Engineering) at the Ministry of Defence Malaysia, Kuala Lumpur 1.7 November 1990 to February 1993 : Marine Engineering Officer Onboard RMN’s Corvette KD KASTURI 1.8 March 1993 to September 1993 : Principal Naval Overseer of the RMN’s Ship Maintenance Depot Lumut, Naval Base Lumut, Perak 1.9 October 1993 to September 1994 : Master of Science course (MSc) in Naval Architecture, UCL-University of London, England, UK 1.10 October to December 1994 : Postgraduate Submarine Design Course, University of London, England, UK 1.11 January 1995 to October 1998 : Staff Officer (Marine Engineering–Project) at Ministry of Defence Malaysia Kuala Lumpur 1.12 November 1998 to October 1999 : Commanding Officer of the RMN’s Ship Maintenance Depot Pasir Gudang, Johore 1.13 November 1999 to May 2000 : Director Naval Architecture of The RMN’s Patrol Vessel Project at PSC-Naval Dockyard Naval Base, Lumut, Perak 1.14 June 2000 to April 2003 : Director Naval Architecture of the RMN’s Patrol Vessel Project at Blohm+Voss GmbH Shipyard Hamburg, Germany 1.15 May 2003 to 30 June 2004 : Director Naval Architecture of The RMN’s Patrol Vessel Project at PSC-Naval Dockyard Naval Base Lumut, Perak 1.16 1 July – till now : Universiti Kuala Lumpur Malaysian Institute of Marine Engineering Technology (UniKL – MIMET) 1.17 1 June 2005 to 30 February 2009 : Dean, UniKL – MIMET 1.18 4 September 2007 to 30 February 2009 : Head of Campus/Dean (UniKL – MIMET) 1.19 1 October 2005 till now : Associate Professor (UniKL – MIMET).

 

Publication(s):

1. Mohd Ramzan Mainal, Md Salim Kamil, Predicting the Ship Power Requirement in Ship Design – Comparison Between Model Tests, Sea Trials and Computation – Bulletin, Institution of Engineers, Malaysia, 1996.

2. Mohd Ramzan Mainal, Md Salim Kamil, Estimation of Ship Manoeuvring Characteristics in the Conceptual Design Stage – Mechanical Journal, First Edition, Universiti Teknologi Malaysia, 1996.

3. Md Salim Kamil, Ujian Kecondongan (Inclining Experiment ) – Ensiklopedia Sains dan Teknologi (Science and Engineering Technology Encyclopedia), Kejuruteran Mekanikal, Universiti Teknologi Malaysia, Dewan Bahasa dan Pustaka dan Kementerian Pendidikan Malaysia, 2000.

4. Md Salim Kamil, Ujian Kelayaklayaran Model Kapal (Ship Model Seakeeping Test) – Ensiklopedia Sains dan Teknologi (Science and Engineering Technology Encyclopedia), Kejuruteran Mekanikal, Universiti Teknologi Malaysia, Dewan Bahasa dan Pustaka dan Kementerian Pendidikan Malaysia, 2000.

5. Md Salim Kamil, Ujian Olahgerak Model kapal (Ship Model Manoeuvring Test) – Ensiklopedia Sains dan Teknologi (Science and Engineering Technology Encyclopedia), Kejuruteran Mekanikal, Universiti Teknologi Malaysia, Dewan Bahasa dan Pustaka dan Kementerian Pendidikan Malaysia, 2000.

6. Md Salim Kamil, Ujian Rintangan Model Kapal (Ship Model Resistance Test) – Ensiklopedia Sains dan Teknologi (Science and Engineering Technology Encyclopedia), Kejuruteran Mekanikal, Universiti Teknologi Malaysia, Dewan Bahasa dan Pustaka dan Kementerian Pendidikan Malaysia, 2000.

7. Md Salim Kamil, Kemudi (Rudder) – Ensiklopedia Sains dan Teknologi Kejuruteran (Science and Engineering Technology Encyclopedia), Kejuruteraan Mekanikal, Universiti Teknologi Malaysia, Dewan Bahasa dan Pustaka dan Kementerian Pendidikan Malaysia, 2000.

8. Md Salim Kamil, Ujian Rintangan dan Dorongan Diri Model Kapal (Ship Model Resistance and Self-Propulsion Tests) – Royal Malaysian Navy Engineering Journal 01/2001.

9. Md Salim Kamil, Evaluation of Exhaust Gas Performance in Ships – Royal Malaysian Navy Engineering Journal 01/2001.

10. Md Salim Kamil, The Design and Construction of a Prototype Pneumatic Propulsion System – International Conference on Engineering Technology, Kuala Lumpur, 11-14 December 2007 (ICET2007).

11. Md Salim Kamil, Bachelor of Engineering Technology (Hons) in Naval Architecture and Subsea Engineering Program – Advance Technology in Offshore Survey Seminar and Exhibition, Kuala Lumpur, 18-20 February 2008 (ATOSSE 2008).

12. Md Salim Kamil, Directional Stability Analysis in Ship Maneuvering, UniKL MIMET Marine Frontier Technical Bulletin Volume 1 (2) 2010, page 3-14.

13. Md Salim Kamil, Revitalizing the Theoretical Approach of Predicting Ship Wave Resistance – Marine Science and Technology Conference, Kuala Lumpur, 12-13 September 2011.

14. Md Salim Kamil, An Accurate Ship Wave Resistance of an Improved Michell-Wigley Equation – International Conference on Engineering Technology, Kuala Lumpur, 6 -8 December 2011.

15. Md Salim Kamil, A Definite Integral Solution of Ship Wave Resistance For Twin-Hull Ships (Catamarans) – World Maritime Technology Conference, St Petersburg, Russia, 29 May – 1 June 2012.

16. М.С. Камил, Применение метода конечного корня в линейной теории волнового сопротивления многокорпусных судов. однокорпусные суда, морские интеллектуальные технологии научный журнал № 3 (25) T.1 2014 ISSN 2073-7173, пс83-90 (Solving Michell Ship Wave Resistance Integral of Mono-Hull Ships by Final Root Method).

17. М.С. Камил, Применение метода конечного корня в линейной теории волнового сопротивления многокорпусных судов. двухкорпусные суда, морские интеллектуальные технологии научный журнал № 3 (25) T.1 2014 ISSN 2073-7173, пс91-98 (Solving Tuck-Lazauskas Ship Wave Resistance Equation of Twin-Hull Ships in Conjunction With Newman Wave Amplitude Function by Final Root Method).

18. М.С. Камил, Вычисление волнового сопротивления тримарана методом конечного корня, Морской Вестник № 4 (52) декабрь 2014 ISSN 1812-3694, пс117-119 (Solving Tuck-Lazauskas Ship Wave Resistance Integral of Triple-Hull Ships In Conjunction With Newman Wave Amplitude Function By Final Root Method).

19. Md Salim Kamil, Mazlan Muslim, A Solution of an Improper Differential Equation of Ship Wave Resistance, Regional Conference on Marine and Mechanical Engineering 2016, 4-6 October 2016, Politeknik Ungku Omar, Ipoh, Perak Malaysia and ARPN Journal of Engineering and Applied Sciences, ISSN 1819-6608, Vol. 12, No. 4, February 2017, pp 1281- 1285.

20. Mazlan Muslim, Md Salim Kamil, FPSO Mooring Configuration based on Malaysia’s Environmental Criteria, Regional Conference on Marine and Mechanical Engineering 2016, 4-6 October 2016, Politeknik Ungku Omar, Ipoh, Perak Malaysia and published in ARPN Journal of Engineering and Applied Sciences ISSN 1819-6608.

21. Md Salim Kamil, Mazlan Muslim and Ishak Ali, Solving Wave Flow Energy Propagated by Twin-Hull Ships (Catamarans), 15th Asian Congress of Fluid Mechanics, 21st – 23rd November 2016 and published in Journal of Physics, ISSN 1751-8113.

22. Md Salim Kamil, Noorazlina Mohamid Salih, Atzroulnizam Abu, Muhammad Muzhafar Abdullah, Norshakila Abd Rasid, Mohd Shahrizan Mohd Said, A Trim Tank Control System for an Autonomous Underwater Vehicle (AUV), International Conference on Marine and Automotive Technology 2017 (ICMAT 2017), 15 – 17 March 2017, awaiting publication in a MATEC web of conference SCOPUS Proceeding.

23. Noorazlina Mohamid Salih, Md Salim Kamil, Mohammad Amiruddin Hashim, Nordiana Jamil, Hanisah Johor, Maneuvering and Submerged Control System for a Modular Autonomous Underwater Vehicle (AUV), International Conference on Marine and Automotive Technology 2017 (ICMAT 2017), 15 – 17 March 2017, awaiting publication in a MATEC web of conference SCOPUS Proceeding.

24. Md Salim Kamil, Kirill Velodosovich Rozhdestvensky, Vladimir Alexandrovich Ryzhov, Senichenkov Yuri Borisovich, Igor Novopashenny, Computer Simulation and Modelling in Engineering for Open Learning Environment – A Case Study on Application of RAND MODEL DESIGNER for Ship Manoeuvring Analysis, 11th International Conference on marine Technology 2018 (MARTEC 2018), Universiti Teknologi Malaysia, 13 – 14 August 2018.

25. Norhayati Mohd Zainee, Md Salim Kamil, Norazimah Mazlan and Ismila Che Ishak, BMI Monitoring System Using LabVIEW, ReMME 2018, 7-9 November, Symphony Hotel, Ipoh, Perak, Malaysia.

26. Md Salim Kamil, Mazlan Muslim and Asmalina Mohamed SaatEffective Control of SOx and NOx to the Atmosphere from Emissions of Ship Propulsion Engines, ReMME 2018, 7-9 November, Symphony Hotel, Ipoh, Perak, Malaysia.

27. Asmalina Mohamed Saad, Mohd Rafee Johan, Md Salim Kamil, Mazlan Muslim, Thermal Degradation of Unsaturated Polyester and Composite Fibreglass Embedded with Aluminium, ReMME 2018, 7-9 November, Symphony Hotel, Ipoh, Perak, Malaysia.

28. Mazlan Muslim, Md Salim Kamil, Asmalina Mohamed Saad, Dynamics Analysis of Single Buoy Mooring in Malaysian Waters, ReMME 2018, 7-9 November, Symphony Hotel, Ipoh, Perak, Malaysia.

Supervision:

Postgraduate:

2016 – 2018

1) Mohd Fauzan Helmy bin Ibrahim (MSc, UTP) HSE Management System for Hotwork Operation at High Elevation in Shipbuilding

Undergraduate:

2018

2) Muhammad Alif Aiman bin Kamalm Bashah DET – Propeller Developed Area Analysis by Using Random Model Designer (RMD) Code

3) Muhammad Amirulnazmi bin Mohammad DET – Propeller Developed Area Analysis by Using Random Model Designer (RMD) Code

4) Muhammad Azrul bin Nor Azham DET – Propeller Developed Area Analysis by Using Random Model Designer (RMD) Code

5) Amirul Haziq bin Haminudin BET – Concept Design of Wing in Ground (WIG) Effect Vehicle

6) Amirul Mustaqim bin Razali Concept of a Self-Righting Boat

7) Mohamad Amirul Afiq bin Amran BET – Concept Design of Robotic Structural Mechanism for Auto Floatable Device (AFD)

8) Mohamad Zharif bin Zahari BET – Resistance Analysis and propulsion System of an Auto Floatable Device (AFD)

9) Mohammad Na’iim Zakri bin Mohd Zakri BET – Concept Design of Sub-Skimmer

10) Thiban A/L Sandrasegaran BET – Analysis of Non-Linear Ship Wave Resistance for Mono-Hull Ships of Fuller Form by Newman Ship Wave Resistance Integral